Brother International HL-L5100DN Online Users Guide HTML - Page 250
Jam MP Tray, Media Type Mismatch
View all Brother International HL-L5100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Error Message Cover is Open Cover is Open Drum ! Cause The fuser cover is not completely closed. The Mailbox back cover is not completely closed. The corona wire on the drum unit must be cleaned. Action Close the fuser cover located inside the back cover of the machine. Close the Mailbox back cover. Clean the corona wire on the drum unit. Jam 2-sided Jam Inside Jam Mailbox Jam MP Tray Jam Rear Jam Tray Jam Tray1 Jam Tray2 Jam Tray3 Jam Tray4 Limit Exceeded Media Type Mismatch No Drum Unit No HUB Support The drum unit or the toner cartridge and drum unit assembly is not installed correctly. The paper is jammed in the 2sided tray or inside the back cover. The paper is jammed inside the machine. The paper is jammed in the Mailbox unit. The paper is jammed in the MP tray. The paper is jammed in the back of the machine. The paper is jammed in the indicated paper tray. See Related Information: Clean the Corona Wire. If the problem continues, replace the drum unit with a new one. Remove the drum unit, remove the toner cartridge from the drum unit, and put the toner cartridge back into the drum unit. Reinstall the drum unit in the machine. Remove the 2-sided tray and open the back cover to pull out all jammed paper. Open the front cover, remove the toner cartridge and drum unit assembly, and pull out all jammed paper. Close the front cover. Remove all jammed paper from the Mailbox unit as shown on the LCD. Remove all jammed paper from in and around the MP tray. Press Retry. Open the fuser cover and remove all jammed paper. Close the fuser cover. Pull out the paper tray and remove all jammed paper as shown in the animation on the LCD. The print limit set in Secure Function Lock 3.0 was reached. Call your administrator to check your Secure Function Lock Settings. The media type specified in the printer driver differs from the paper type specified in the machine's menu. Load the correct type of paper in the tray indicated on the LCD, and then select the correct media type in the Paper Type setting on the machine. The drum unit is not installed correctly. Reinstall the toner cartridge and drum unit assembly. A USB hub device is connected to Disconnect the USB hub device from the USB the USB host connector. host connector. 245