Brother International HL-L5200DWT Online Users Guide HTML - Page 252
Error Message, Cause, Action, in Canada
View all Brother International HL-L5200DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Error Message Print Unable ## Replace Toner Screen Init. Fail Self-Diagnostic Size Error Size Error 2-sided Size Mismatch Supplies Drum End Soon Supplies Replace Drum Supplies Toner Low Cause Action The machine has a mechanical problem. • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: http://www.brother-usa.com/service The toner cartridge is at the end of Replace the toner cartridge with a new one. its life. The machine stops all print operations. The Touchscreen was pressed before the power on initialization was completed. Make sure nothing is touching the Touchscreen. Debris may be stuck between the Insert a piece of stiff paper between the lower lower part of the Touchscreen and part of the Touchscreen and its frame and its frame. slide it back and forth to push out any debris. The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. The paper size defined in the printer driver is not supported by the defined tray. Choose a paper size supported by the defined tray. The paper size specified in the machine's paper size setting is not Press (if required). available for automatic 2-sided Load the correct size of paper in the tray and printing. set the tray for that paper size. The paper in the tray is not the correct size and is not available for automatic 2-sided printing. Choose a paper size supported by 2-sided printing. Paper sizes available for automatic 2-sided printing are Letter, Legal, Mexico Legal, India Legal and Folio. The paper in the tray is not the correct size. Load the correct size of paper in the tray indicated on the LCD and set the size of paper for the tray. Press Retry. The drum unit is near the end of Order a new drum unit before the LCD its life. displays Replace Drum. It is time to replace the drum unit. Replace the drum unit with a new one. See Related Information: Replace the Drum Unit. The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. See the instructions included with the new drum unit. If the LCD displays this message, Order a new toner cartridge now so you have you can still print. The toner it ready when the LCD displays Replace cartridge is near the end of its life. Toner. 247