Brother International HL-L5200DWT Online Users Guide HTML - Page 334
General Setup], Level 1, Description
View all Brother International HL-L5200DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Level 1 Level 2 Description Separator Tray - Select the tray that contains the paper used as the separator paper, which is inserted between each print job. 2-sided 2-sided Print Select whether to print on both sides of the paper. Single Image For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. When you use Letterhead or Preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for Letterhead or Preprinted paper, the last page will be printed on the reverse side. Paper Type MP Tray Select the paper type that matches the paper in the MP tray. Tray1 Select the paper type that matches the paper in the standard paper tray. Tray2 1 Select the paper type that matches the paper in the Optional Tray (Tray 2). Tray3 1 Select the paper type that matches the paper in the Optional Tray (Tray 3). Tray4 1 Select the paper type that matches the paper in the Optional Tray (Tray 4). Paper Size MP Tray Select the size of paper you loaded in the MP tray. Tray1 Select the size of paper you loaded in the standard paper tray. Tray2 1 Select the size of paper you loaded in the Optional Tray (Tray 2). Tray3 1 Select the size of paper you loaded in the Optional Tray (Tray 3). Tray4 1 Select the size of paper you loaded in the Optional Tray (Tray 4). Check Size - Select whether to display a message telling you to check that the size of the paper in the machine and the machine's Paper Size setting match. 1 Available if the Optional Tray(s) is installed. [General Setup] Level 1 Level 2 Local Language - Resolution - Density - Ecology Toner Save Sleep Time Quiet Mode Auto Power Off Panel Control Button Repeat Message Scroll LCD Contrast Auto Online Setting Lock Interface Select Description Select the LCD language for your country. Choose a print resolution. Increase or decrease the print density. Increase the page yield of the toner cartridge. Set how much time will pass before the machine enters Power Saving Mode. Decrease printing noise. Set the number of hours that the machine will remain in Deep Sleep Mode before going into Power Off Mode. Set the time for the LCD message to change when holding a or b at intervals. Set the time in seconds that an LCD message will scroll across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec. Adjust the contrast of the LCD. Set the machine to return to Ready Mode after it has been idle for 30 seconds. Lock your machine's settings using the Setting Lock password. Select the interface to use. If you select Auto, the machine changes the interface to USB or Network depending on which interface is receiving data. 329