Brother International HL-L5200DWT Online Users Guide HTML - Page 335
Print Menu
View all Brother International HL-L5200DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Level 1 Level 2 Interface Auto IF Time Input Buffer Inputprime (Available only for certain models) Delete Storage Macro ID Font ID Format [Print Menu] Level 1 Emulation Auto Continue Level 2 - Paper Type - Paper Size - Copies - Orientation - Print Position X Offset Y Offset Auto FF HP LaserJet Font No. Font Pitch Font Point Symbol Set Table Print Auto LF Auto CR Auto WRAP Auto SKIP Left Margin Right Margin Top Margin Bottom Margin Lines Description Set the time-out period for the auto interface selection. Increase or decrease the input buffer capacity. Select if you want to use the signal of parallel ports as a reset. Delete the registered Macro data. Delete the registered Font data. Restore the Macro and Font data of your machine to the default settings. Description Choose the emulation mode. Select this setting if you want the machine to clear paper size errors or media type errors, and use paper from other trays. Set the type of paper. Set the size of paper. Set the number of printed pages. Set pages to print in either portrait or landscape orientation. Move the print start position (at the top-left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi. Move the print start position (at the top-left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi. Allow the machine to print any remaining data automatically. Set the font number. Set the font pitch. The Font Pitch menu appears when you choose I012 to I018, I031 to I037 or I097 to I109 in Font No. setting. Set the font size. The Font Point menu appears when you choose I000 to I011, I019 to I030 or I038 to I096 in Font No. setting. Select the symbol or character set. Print the code table. ON: CR -> CR+LF, OFF: CR -> CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR OFF: LF -> LF, FF -> FF, or VT -> VT Choose whether a line feed and carriage return will happen when the machine reaches the right margin. Choose whether a line feed and carriage return will happen when the carriage position reaches the bottom margin. Set the left margin at column 0 to 70 columns at 1 cpi. Set the right margin at column 10 to 80 columns at 1 cpi. Set the top margin distance from the top edge of the paper. Set the bottom margin distance from the bottom edge of the paper. Set the number of lines on each page. 330