Brother International HL7050 Network Users Manual - English - Page 110
Pathworks For Dos Configuration, Service Options, Add Service, Add Printer, Queue, Printer Service
UPC - 012502603382
View all Brother International HL7050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
PATHWORKS for DOS Configuration To configure the print server for PATHWORKS for DOS: 1 Create a VMS queue as previously described. 2 Run PCSA_MANAGER on the VMS system. a Type MENU to get the PCSA menu. b Select SERVICE OPTIONS c Select ADD SERVICE (do not use the ADD PRINTER QUEUE option as this will add a PCL printer reset that will affect PostScript printing. d Select PRINTER SERVICE. e Enter service name (pick a name). f Enter VMS queue name (previously defined). g Enter VMS form name (use the default if you do not have a specific form defined). 3 Perform the following steps on the PC: a If you are using DOS, type the command USE LPTx:\\node\service at the DOS prompt, where x is the PC parallel port number, node is the DECnet node name and service is the service name picked previously. For example: USE LPT1:\\VAX\LASER You may delete this print service by typing LATCP at the C:> prompt and then entering the command DELETE LPT1: b If you are using Windows® 3.1x, make sure that you have selected DEC PATHWORKS as the network under the Windows® Setup icon. c Then click on the Print Manager icon, select Options and then Printer Setup. LAT NETWORK CONFIGURATION 9 - 5