Brother International Innov-ís 500D Users Manual - English - Page 33
Threading the needle
View all Brother International Innov-ís 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SE-BrotherE_sgml.book Page 27 Monday, June 30, 2003 3:44 PM Pull the thread under the disc at the front in m the lower-left corner and around to the right, Threading the needle and then the thread will be cut with the cutter. Follow arrow 6 indicated on the thread cassette. In this section, the procedures for installing the thread cassette and threading the needle are described. The needle threader is used to thread the needle at the 1 same time that the thread cassette is inserted. Memo z The needle threader can be used with sewing machine needles 75/11 through 100/16. z Thread with a thickness of 130/20 or thicker cannot be used with the needle threader. z The needle threader cannot be used with the 1 wing needle or the twin needle. z If the needle threader cannot be used, refer to "Thread the needle manually (without 2 using the needle threader)" (page 30). Check that the thread cassette indicator is lit a up in green. 1 a Disc b Cutter X The spool of thread is now loaded in the thread cassette. Note z Be sure the thread is cut as described above, otherwise the needle threader cannot be used to thread the needle. a Thread cassette indicator • If the thread cassette indicator is lit up in red, the needle has not been raised to the correct position. Press (Needle position button) once to raise the needle. 1 a Needle position button Upper Threading 27