Brother International Innov-ís 500D Users Manual - English - Page 45
Lift up the needle-changing tool so that
View all Brother International Innov-ís 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
SE-BrotherE_sgml.book Page 39 Monday, June 30, 2003 3:44 PM Using the screwdriver, loosen the needle c clamp screw. Insert the needle until it touches the needle g stopper, and then use the screwdriver to tighten the needle clamp screw. 1 Lower the needle-changing tool. d X The needle is installed. Lower the needle-changing tool off of the h needle. Note z The needle-changing tool can not be used for the twin needle. X The needle can be removed from the needle bar. Insert the new needle into the hole in the e needle-changing tool. Insert the needle with the flat side of the needle toward the rear of the machine. Lift up the needle-changing tool so that the f fork hooks onto the needle clamp screw. Replacing the Needle 39
Replacing the Needle
39
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
c
Using the screwdriver, loosen the needle
clamp screw.
d
Lower the needle-changing tool.
The needle can be removed from the needle
bar.
e
Insert the new needle into the hole in the
needle-changing tool.
Insert the needle with the flat side of the needle
toward the rear of the machine.
f
Lift up the needle-changing tool so that the
fork hooks onto the needle clamp screw.
g
Insert the needle until it touches the needle
stopper, and then use the screwdriver to
tighten the needle clamp screw.
The needle is installed.
h
Lower the needle-changing tool off of the
needle.
Note
The needle-changing tool can not be used
for the twin needle.
SE-BrotherE_sgml.book
Page 39
Monday, June 30, 2003
3:44 PM