Brother International Innov-ís 500D Users Manual - English - Page 38
When using the twin needle, be sure
View all Brother International Innov-ís 500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SE-BrotherE_sgml.book Page 32 Monday, June 30, 2003 3:44 PM GETTING READY Insert the thread cassette (with the extra spool e pin attached) into the thread cassette compartment. Attach zigzag foot "J". i • For details on changing the presser foot, refer to "Replacing the Presser Foot" (page 40). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. • For more details, refer to step e in "Using the extra spool pin" (page 29). X Pass both threads through the needle bar thread hooks. • If the thread cassette is inserted with the twin needle attached, the sewing machine may be damaged. Install the twin needle. f • For details, refer to "Replacing the needle" (page 37). Manually thread the left needle with the g thread for the left side of the stitch. • For details, refer to "Thread the needle manually (without using the needle threader)" (page 30). Turn on the sewing machine and select a j stitch. • For stitch selection see "Selecting stitching" (page 47). • See "Stitch Settings" (page 66) for stitches that use a twin needle. CAUTION ● When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged. Press k panel. (Settings key) in the operation X The settings screen appears. Press . l Remove the thread for the right side of the h stitch from only the lower hook of the needle bar thread hooks, and then use it to thread the right needle. X displays in reverse highlight. • If pressed again, it returns to . X The twin needle can now be used. 32