Brother International Innov-ís 80 Users Manual - English - Page 128
Removing the needle plate
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Insert the bobbin case so that the projection h on the bobbin case aligns with the spring. Removing the needle plate a b When the thread is tangled and cannot be removed by cleaning the race, remove the needle plate. Follow steps a through f on page 126. a Remove the needle plate by removing the b screws with the included screwdriver. a b a Projection b Spring Remove the tangled thread from the needle c plate. Return the needle plate to its original position, 4 d and then tighten the screws with the included screwdriver. Insert the tabs on the needle plate cover into i the needle plate, and then slide the cover back on. a a Needle plate cover Install the flat bed attachment in its original j position. CAUTION ● Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XC3153-151), contact your nearest authorized service center. ● Be sure that the bobbin case is correctly installed, otherwise the needle may break. Note z Align the two screw holes on the needle plate with the two holes on the machine. Follow steps g through j (page 126-127). e Care and Maintenance 127