Brother International Innov-ís 80 Users Manual - English - Page 81
Buttonhole sewing
View all Brother International Innov-ís 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
UTILITY STITCHES Buttonhole sewing The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below. 1 1 1 1 a Reinforcement stitching The names of parts of buttonhole foot "A", which is used for sewing buttonholes, are indicated below. Use chalk to mark on the fabric the position a and length of the buttonhole. 1 a b 2 5 3 4 A a Button guide plate b Presser foot scale c Pin d Marks on buttonhole foot e 5 mm (3/16 inch) a Marks on fabric Pull out the button guide plate of buttonhole b foot "A", and then insert the button that will be put through the buttonhole. 80
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
80
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8 inches) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the back, as shown below.
a
Reinforcement stitching
The names of parts of buttonhole foot “A”, which is
used for sewing buttonholes, are indicated below.
a
Button guide plate
b
Presser foot scale
c
Pin
d
Marks on buttonhole foot
e
5 mm (3/16 inch)
a
Use chalk to mark on the fabric the position
and length of the buttonhole.
a
Marks on fabric
b
Pull out the button guide plate of buttonhole
foot “A”, and then insert the button that will
be put through the buttonhole.
1
1
1
1
A
1
2
5
3
4
a
b