Brother International Innov-is 4000D Operation Manual - Page 101
Button Sewing, CAUTION
View all Brother International Innov-is 4000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
SEWING THE STITCHES Button Sewing Buttons can be sewn on using the machine. Buttons with 2 or 4 holes can be attached. Stitch Stitch name Button sewing Presser foot Applications Attaching buttons Stitch width [mm (inch.)] Auto. Manual Stitch length [mm (inch.)] Auto. Manual 3.5 2.5 - 4.5 (1/8) (3/32 - 3/16) - - Twin needle NO Note • Do not use the automatic thread cutting function when sewing buttons. Otherwise, you will lose the thread ends. a Select . b Raise the presser foot and bed table attachment. detach the flat c Lower the feed dog position to lower the feed dogs. switch to a a Feed dog position switch d Attach button button sewing foot "M", slide the along the metal plate and into the presser foot, and lower the presser foot. e Turn the handwheel to check that the needle goes into each hole correctly. * If the needle does not reach the holes on the left side, adjust the stitch width. * To attach the button more securely, repeat the process. f Gently hold the end of the upper thread and start sewing. → The machine stops automatically when sewing is finished. CAUTION Make sure the needle does not strike the button during sewing. The needle may break and cause injury. g From the wrong side of the fabric, pull the end of the bobbin thread to pull the upper thread through to the wrong side of the fabric. Tie the two thread ends together and cut the threads. ab a Button b Metal plate 90