Brother International Innov-is 4000D Operation Manual - Page 34
Pulling Up the Bobbin Thread, CAUTION
View all Brother International Innov-is 4000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
e Set the bobbin in the bobbin case the thread unwinds to the left. so that LOWER THREADING h Insert the tab in the lower-left corner of the bobbin cover, and then lightly press down on the right side to close the cover. 1 Getting Ready f Hold the bobbin lightly with your right hand, and then guide the thread with your left hand. g Pass the thread through the pull the thread out towards guide, and the front. then Pulling Up the Bobbin Thread There may be some sewing applications where you want to pull up the bobbin thread; for example, when making gathers, darts, or doing free motion quilting or embroidery. Memo You can pull up the bobbin thread after threading the upper thread (see "UPPER THREADING" on page 25). a Guide the bobbin groove, following thread through the the arrow in the illustration. * Do not cut the thread with the cutter. * Do not replace the bobbin cover. a a Cutter → The cutter cuts the thread. b While holding the upper thread, press the needle position button to lower the needle. CAUTION a • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly. Otherwise, the thread may break or the thread tension will be incorrect. a Needle position button 23