Brother International Innov-is 4000D Operation Manual - Page 160
Press the Start/Stop button.
View all Brother International Innov-is 4000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
SEWING AN EMBROIDERY PATTERN c Remove the appliqué material from the embroidery frame, and then cut carefully along the stitching. After cutting, remove all of the stitching thread carefully. * Carefully cut out the pattern on the outline you just sewed. Do not cut inside the stitching line, as the appliqué fabric will not be caught by the appliqué stitch. f Apply a thin layer of adhesive to the back adhesive or spray of the appliqué piece and attach it to the appliqué position so that it follows the seam of the outline. d Place the base frame. material into the embroidery Memo If the appliqué material is a lightweight fabric, you may want to use a fusible web on the back to stabilize the fabric and for appliqué placement. Fuse appliqué in place with an iron. Do not remove fabric from the frame to iron the appliqué material. g Press the "Start/Stop" button. a 5 Embroidery a Base material e Press the "Start/Stop" button position of the appliqué. to sew the * Use the same thread color you plan to use when attaching the appliqué in step g. a Memo Some patterns may not show all three appliqué steps. Sometimes the "Appliqué" step will be shown as a color. → The appliqué will then be completed. h Change the rest the upper thread and of the embroidering. then carry out b a Position of appliqué b Base material → The machine will sew around the position of the appliqué and will then stop. Memo • Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern and then clean away the glue. • For best sewing results clip all threads between color steps. 149