Brother International Innov-is 6750D Operation Manual - Page 216
After selecting the pattern, press, and then press, From the areas shown in the window, select,
View all Brother International Innov-is 6750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
CONFIRMING THE PATTERN POSITION Note • When inserting the fabric in the embroidery frame, check that the embroidery pattern fits within the embroidery field for the frame that is used. c From the areas shown in the window, select the area containing the embroidery positioning sticker. * If an area is not selected, scanning will start from the center. a Embroidery field b Embroidery pattern c Embroidery positioning sticker • Depending on the type of fabric that is used, a part of the embroidery positioning sticker may remain attached when it is peeled off. Before using the embroidery positioning sticker, check that it can be cleanly removed from a scrap piece of the fabric to be used. b After selecting the pattern, press , and then press . → A window appears so that the area containing the embroidery positioning sticker can be selected. Note • Scanning cannot start from the center after an area has been selected. To scan from the center, press to close the window, then display the window again but do not select an area to scan, then press . • If the embroidery positioning sticker overlaps two areas, select either of the two areas. 214