Brother International Innov-is 6750D Operation Manual - Page 349
Fabric is caught in the machine, and cannot be removed
View all Brother International Innov-is 6750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
TROUBLESHOOTING Fabric is caught in the machine and cannot be removed h Remove the bobbin case. If threads remain in the bobbin case, remove them. If the fabric is caught in the sewing machine and cannot be removed, the thread may have become tangled under the needle plate. Follow the procedure described below to remove the fabric from the machine. If the operation could not be completed according to the procedure, instead of attempting to complete it forcefully, contact your dealer or nearest authorized service center. ■ Removing the fabric from the machine a Immediately stop the sewing machine. b Turn off the sewing machine. c Remove the needle. If the needle is lowered into the fabric, turn the handwheel away from you (clockwise) to raise the needle out of the fabric, and then remove the needle. * Refer to "CHANGING THE NEEDLE" on page 67. d Remove holder. the presser foot and presser foot * Refer to "CHANGING THE PRESSER FOOT" on page 65. e Lift it. up the fabric and cut the threads below If the fabric can be removed, remove it. Continue with the following steps to clean the race. f Remove the needle plate cover. a Bobbin case i Use the cleaning brush or a vacuum cleaner to remove any dust or loose threads from the race and its surrounding area. a Cleaning brush b Race If the fabric could be removed If the fabric could not be removed Continue with step p. Continue with step j. j Use the enclosed disc-shaped screwdriver to loosen the two screws on the needle plate. a Needle plate cover g Cut out remove the the tangled threads, bobbin. and then Note • Be careful not to drop the removed screws in the machine. 9 Appendix 347