Brother International Innov-is 900D Operation Manual - Page 155
Example: Selecting an embroidery pattern
View all Brother International Innov-is 900D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Press this key to change the thread settings. Press this key to select or cancel programmed thread cutting. Press or to change the thread density (characters and frame patterns only). Press this key to adjust the pattern. Back one color Forward one color Back one stitch Forward one stitch • For details, refer to "Resewing" (page 165). The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed. For details, refer to "Adjusting the layout and the size" (page 161). 4 Press this key when you want to change the color, character by character in character embroidery. Since the sewing machine stops at the end of each character, the upper thread is changed as you sew. Press this key again to cancel multicolor. Memo z Keys that appear surrounded with a dotted line (ex. ) cannot be used. Example: Selecting an embroidery pattern The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 30 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not sewn or when restarting the sewing machine after power has been turned off in the middle of the operation. Press this key to check the order of multi color. Press to switch the display. Selecting Embroidery Patterns 153