Brother International Innov-is 900D Operation Manual - Page 47
Removing and attaching the, presser foot holder
View all Brother International Innov-is 900D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removing and attaching the ■ Attaching the presser foot holder presser foot holder Raise the presser foot lever. a X The presser foot is raised. Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that Align the presser foot holder with the lower- 1 does not use the presser foot holder, such as the b left side of the presser bar. embroidery foot, optional free-motion open toe quilting foot "O" and optional walking foot. Use the screwdriver to remove the presser foot holder. CAUTION z Before attaching/removing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if one of the operation buttons is accidentally pressed and the machine starts sewing. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 43). Use the screwdriver to loosen the presser foot b holder screw. a b a Presser bar b Presser foot holder Hold the presser foot holder in place with your c right hand, and then tighten the screw using the screwdriver in your left hand. c a d b a Screwdriver b Presser foot holder c Presser foot holder screw d Presser bar X The presser foot is removed from the presser bar. ab a Screwdriver b Presser foot holder CAUTION z Do not hit the needle with your finger or the presser foot when attaching/removing it. The needle may break or cause injury. z Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the presser foot and break or bend. Replacing the Presser Foot 45