Brother International IntelliFax-2480C Quick Setup Guide - English - Page 7

Setting Up the Machine 4 Place the battery in the position shown. 5 Install the battery cover by sliding it onto the back of the handset. Note Be careful that you do not catch the battery connector cord. 6 After installation, charge the battery more than 12 hours before using the cordless handset. 5 Charging the battery (FAX-2580C only) 1 Place the cordless handset on the cradle with the dial pad facing forward. Note • After replacement, you should set the date and time. (See Date and Time in the Digital Cordless Handset User's Guide.) • The LCD of the handset will display "Searching for Base Unit" or "Base Unit not detected" until the initial setup of the machine is complete. • If your battery is getting low, you should charge the battery. You can see the battery strength at the bottom right of the LCD. 6 Choosing a location (FAX-2580C only) „ Choose a location where the temperature remains between 50° F and 95° F (10° and 35° C). „ DO NOT put the cordless handset near heaters, air conditioners, water or chemicals. „ DO NOT expose the cordless handset to direct sunlight, excessive heat, moisture, or dust. „ DO NOT use the cordless handset near electro-medical equipment. „ We recommend at least 9.8 ft (3 m) between the machine (base unit) or cordless handset and other electronic devices. mouse headset USB memory Bluetooth product 9.8 ft (3 m) (FAX-2580C) 9.8 ft (3 m) 9.8 ft (3 m) 5