Brother International MFC-790CW Network Users Manual - English - Page 64
Wireless Network Connection SETUP, Network and Sharing Center - control center
UPC - 012502620501
View all Brother International MFC-790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Wireless configuration for Windows® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN) Note • If a message to restart your PC appears after the wireless settings have been changed, restart your PC and then go back to step d and continue with the install skipping steps i, j and k. • For Windows Vista® users: You can temporarily change the wireless settings on your computer, following the steps below: 1 Click and then Control Panel. 2 Click Network and Internet and then Network and Sharing Center icon. 4 3 Click Connect to a network. 4 You can see the SSID of the wireless Brother machine in the list. Choose SETUP and click Connect. 5 Click Connect Anyway and then Close. 6 Click View status of Wireless Network Connection (SETUP). 7 Click Details... and check the Network Connection Details. It may take a few minutes to change from 0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254). • For Windows® XP SP2 users you can temporarily change the wireless settings on your PC, following the steps below: 1 Click Start and then Control Panel. 2 Click Network Connections icon. 3 Choose and right click Wireless Network Connection. Click View Available Wireless Networks. 4 You can see the Brother wireless machine in the list. Choose SETUP and click Connect. 5 Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0. to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254). l Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is powered on, and then click Refresh. 54