Brother International MFC-8950DW Quick Setup Guide - English - Page 32
One push setup using WPS (Wi-Fi Protected Setup) or AOSS™ (Windows® and Macintosh)
View all Brother International MFC-8950DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
For Wireless Network Users One push setup using WPS (Wi-Fi Protected Setup) or AOSS™ (Windows® and Macintosh) 21 Configure the wireless settings a Confirm your wireless access point/router has the WPS or AOSS™ symbol as shown below. b Place the Brother machine within range of your WPS or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your wireless access point/router. If you began the wireless setup from step 6 on page 8, press WPS/AOSS. Then go to d. All other users, go to c. c On your machine, press Menu. Press a or b to display Network, and press Network. Press WLAN, and then WPS/AOSS. d When WLAN Enable? is displayed, press On. This will start the wireless setup wizard. Otherwise press Stop/Exit to exit from the wireless setup wizard. e When Start WPS or AOSS on your wireless access point / router , then press OK. appears, press the WPS or AOSS™ button on your wireless access point/router. See the user's guide for your wireless access point/router for instructions. And then press OK. Note If your wireless access point/router supports WPS (PIN Method) and you want to configure your machine using the PIN (Personal Identification Number) Method, see Configuration using the PIN Method of WPS (Wi-Fi Protected Setup) in the Network User's Guide. f A connection result message appears on the LCD and a WLAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 33. Wireless setup is now complete. A four level indicator at the top right of your machine's LCD will show the wireless signal strength of your wireless access point/router. To install the MFL-Pro Suite, continue to step 22. For Windows® Users: Now go to page 37 For Macintosh Users: Now go to page 39 This feature will automatically detect which mode (WPS or AOSS™) your wireless access point/router uses to configure your machine. 32