Brother International MFC-8950DW Quick Setup Guide - English - Page 6

c Fan the stack of paper well to avoid paper jams and misfeeds. d Put the paper in the tray and make sure:  The paper is below the maximum paper mark (bbb) a. Over filling the paper tray will cause paper jams.  The side to be printed on is face down.  The paper guides touch the sides of the paper so it will feed properly. 4 Connect the power cord and telephone line Important DO NOT connect the interface cable yet. a Connect the AC power cord to the machine and then plug it into an AC power outlet. b Turn the machine's power switch on. e Put the paper tray firmly back in the machine. Make sure that it is completely inserted into the machine. f Lift up the support flap a to prevent paper from sliding off the face-down output tray. Important DO NOT touch the Touchscreen immediately after plugging in the power cord or turning the machine on. Doing this may cause an error. c Connect the telephone line cord. Connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. For more information about recommended paper, see Recommended paper and print media in the Basic User's Guide. Important The telephone line cord MUST be connected to the jack on the machine marked LINE. 6