Brother International MFC-9320CW Users Manual - English - Page 180
Calibration, Stop/Exit, Status Monitor, Control / Color - printer driver
UPC - 012502622406
View all Brother International MFC-9320CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
d Wipe the two pick-up rollers (1) inside of the machine to remove dust. 1 e Put the paper tray back in the machine. f Plug the machine's power cord back into the AC power outlet. Turn on the machine's power switch. Calibration C The output density for each color may vary depending on the environment the machine is in such as temperature and humidity. Calibration helps you to improve the color density. a Press Menu, 4, 5. b Press a or b to select Calibrate. c Press OK. d Press 1 to select Yes. e Press Stop/Exit. You can reset the calibration parameters back to those set at the factory. a Press Menu, 4, 5. b Press a or b to Reset. c Press OK. d Press 1 to select Yes. e Press Stop/Exit. Note • If an error message is displayed, press Stop/Exit and try again. For more information, see Error and maintenance messages on page 141. • If you print using Windows® printer driver, you need to perform the calibration from the Windows® printer driver. See Advanced tab in the Software User's Guide on the CD-ROM. • If you print using the Macintosh printer driver, you need to perform the calibration using the status monitor. See Status Monitor in the Software User's Guide on the CD-ROM. When the Status Monitor is open, choose Control / Color Calibration from the menu bar. 164