Brother International MFC-J425W Users Manual - English - Page 75
Document jam, Document is jammed in the top of the ADF unit, ADF unit
View all Brother International MFC-J425W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Troubleshooting Document jam B Documents can jam in the ADF unit if they are not inserted or fed properly, or if they are too long. Follow the steps below to clear a document jam. Document is jammed in the top of the ADF unit B a Take out any paper from the ADF that is not jammed. b Open the ADF cover. c Remove the jammed document by pulling it upward. Document is jammed inside the ADF unit B a Take out any paper from the ADF that is not jammed. b Lift the document cover. c Pull the jammed document out to the left. d Close the document cover. e Press Stop/Exit. d Close the ADF cover. B e Press Stop/Exit. IMPORTANT To avoid future document jams close the ADF cover properly by pressing it down in the middle. 61
Troubleshooting
61
B
Document jam
B
Documents can jam in the ADF unit if they are
not inserted or fed properly, or if they are too
long. Follow the steps below to clear a
document jam.
Document is jammed in the top of the
ADF unit
B
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Remove the jammed document by
pulling it upward.
d
Close the ADF cover.
e
Press
Stop/Exit
.
IMPORTANT
To avoid future document jams close the
ADF cover properly by pressing it down in
the middle.
Document is jammed inside the ADF
unit
B
a
Take out any paper from the ADF that is
not jammed.
b
Lift the document cover.
c
Pull the jammed document out to the
left.
d
Close the document cover.
e
Press
Stop/Exit
.