Brother International MFC-J5930DW Basic Users Guide - Page 40
Scan Using the Scan Button on Your Brother Machine, Scan Using the Scan Button, on the Machine
View all Brother International MFC-J5930DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Scan Using the Scan Button on Your Brother Machine Scan Using the Scan Button on the Machine Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software. 1 Load your document. 2 Press [Scan]. 3 Swipe left or right or press d or c to display [to PC]. The icon moves to the middle of the Touchscreen and is highlighted in blue. 4 Press [to PC]. • Press [Start] to start scanning without changing additional settings. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. 8 To scan both sides of the document (for MFC-J5930DW only), press [2-sided Scan], and then select the document type. 9 Change the scan settings you want to change, such as scan type, resolution, file type and document size, if needed. When finished, press [OK]. 10 Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. 5 Press [to File]. 6 If the machine is connected over the network, swipe up or down or press a or b to display the computer where you want to send the data, and then press the computer name. If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK]. 7 Do one of the following: • To change the settings, press [Options], and then go to the next step. 26