Brother International MFC-J5945DW Online Users Guide HTML - Page 538
Related Information, Clean the Paper, Pick-up Rollers, Caller ID, Load Paper
![]() |
View all Brother International MFC-J5945DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 538 highlights
Error Message Low Temperature Media is Full. No Caller ID No Device No File No Paper Fed No Response/Busy Cause Action Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The room temperature is too low. After warming the room, allow the machine to warm up to room temperature. Try again when the machine has warmed up. The USB flash drive you are using already Your machine can only save to your USB contains 999 files. flash drive if it contains fewer than 999 files. Delete unused files and try again. The USB flash drive you are using does not have enough free space to scan the document. Delete unused files from your USB flash drive to make some free space, and then try again. There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. To use the Caller ID feature, call your telephone company. See Related Information: Caller ID. When configuring the Wi-Fi Direct • Make sure your machine and mobile network, the Brother machine cannot find device are in the Wi-Fi Direct mode. your mobile device. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the WiFi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. The USB flash drive in the media drive does not contain a .JPG file. Put the correct USB flash drive into the slot again. The machine is out of paper or paper is not correctly loaded in the paper tray. Do one of the following: • Refill the paper tray, and then follow the LCD instructions. • Remove and reload the paper, and then follow the LCD instructions. See Related Information: Load Paper. The paper was not inserted in the center position of the MP tray. Remove the paper and reinsert it in the center of the MP tray, and then follow the LCD instructions. See Related Information: Load Paper in the Multi-purpose Tray (MP Tray). The Jam Clear Cover is not closed correctly. Make sure the Jam Clear Cover is closed evenly at both ends. See Related Information: Printer Jam or Paper Jam. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The number you dialed does not answer Verify the number and try again. or is busy. 530
![](/manual_guide/products/brother-international-mfcj5845dwxl-online-users-guide-html-7687230/538.png)