Brother International PC-6500 Users Manual - English - Page 18
Installing the presser foot adapter & the walking foot - slide
View all Brother International PC-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONTENTS SETTING UP SEWING Installing the presser foot adapter & the walking foot The presser foot adapter is used for attaching screw-on presser feet to this machine. 1 2 3 1 Adapter 2 Screw (for securing adapter) 3 Screw (for securing presser foot) The walking foot is useful for sewing materials that are hard to feed, such as vinyl cloth, synthetic leather, thin leather, etc. This foot prevents such materials from crumpling, slipping or sticking by evenly feeding both pieces of fabric. The walking foot can only be used to sew the straight stitches ( and ) and the zigzag stitch ( ). 1. Remove the installed presser foot and the presser foot holder. 3 5 UTILITY STITCHES MY CUSTOM STITCHTM (CREATE YOUR OWN STITCH DESIGNS) EMBROIDERING MAINTENANCE ERROR MESSAGES 1 1 2 2. Slide the presser foot adapter as high as possible up the presser foot bar, and then fasten it by firmly tightening the screw (for securing adapter) with the enclosed screwdriver or disc-shaped screwdriver. 1 Screw (for securing adapter) Note If the screw is not completely tightened, injuries may occur. 3. Hook the connecting fork of the walking foot onto the needle clamp screw, lower the presser foot lever, and then fasten the walking foot by firmly tightening the screw (for securing presser foot) with the enclosed screwdriver or disc-shaped screwdriver. 1 Connecting fork 2 Screw (for securing presser foot) Note - Before sewing, be sure to turn the balance wheel slowly toward you to check that the needle does not touch the presser foot, otherwise injuries may occur. - Sew at a slow to medium speed. 15 SEWING CHART PATTERNS (PROGRAMMED IN MACHINE)