Brother International PE-300S Users Manual - English - Page 104
Finding The Source Of The Problem
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Contents Setting Up Basic Sewing Machine Operation Utility Stitches Embroidering Maintenance Troubleshooting FINDING THE SOURCE OF THE PROBLEM • Trouble with threads and stitches Inability to thread needle Inability for thread Embroldered pattern tension control is out of shape Needle position is not correct. Set needle at proper position using "NEEDLE POSITION" button. P.20 NO Upper threading is not correct. Re-thread upper thread. P.20~22 NO The fabric has been placed in the embroidery frame incorrectly. Place the fabric in the embroidery frame correctly. P.75~76 NO Hook of needle threader does not fit into the eye of the needle. Set needle at proper position using "NEEDLE POSITION" button. P.20 NO Set of bobbin thread is not correct. Thin or stretch fabric is being used with no stabilizer fabric attached. Set bobbin properly and pull out the bobbin thread. Attach stabilizer fabric. P.19 NO P.74 NO Combination of fabric, thread and needle is not correct. Check "RELATED CHART OF SEWING FABRICS, THREAD AND NEEDLE". P.35 NO The embroidery frame has been attached to the machine incorrectly. Attach the embroidery frame to the machine correctly. P.77 NO Presser foot holder is not properly attached. Thread is entangled. Reattach presser foot holder properly. NO Remove thread- ends in the race or inner shuttle. P.97~98 NO Upper thread tension is too tight. Reduce thread tension by turning tension dial. P.30 NO • Mechanical trouble Fabric is not fed properly Feed dog is lowered. Raise the feed dog with the feed dog adijustment lever. P.61 NO Stitch length is set at no feeding. Set stitch length properly. P.27~29 NO The combination of selected stitch and presser foot is not correct. Change presser foot to correct one. P.103 NO Correct needle is not being used. Change to proper needle. P.34 NO Thread is entangled. Remove thread- ends in the race or inner shuttle. P.97~98 NO Error Messages Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) If you have gone through the troubleshooting tips and are still unable to find the source of the problem, please take your machine back to the place of purchase or your nearest Brother dealer for repairs. 101