Brother International PS 9000 User Manual - Page 12
Back, Right side - usb
![]() |
UPC - 012502607786
View all Brother International PS 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Back Right side Power Connector LAN USB DC5V IN Push Button Network Port (10BASE-T/100BASE-TX) USB Port ■ Network Port (10BASE-T/100BASE-TX) Connection for the network cable. *In 100BASE-TX environment, use category 5. ■ USB Port Connection for the USB cable. ■ Power Connector Connection for the AC adapter. ■ Push Button Press this button to reset PS-9000 to its factory default settings. ■ Factory Default Settings Make sure that the AC adapter is not connected to PS-9000. 1 While pressing the push button, connect the AC adapter to PS-9000. The STATUS LED (orange) 2 will blink once when the connection is made. Continue to press the push button for two seconds. The STATUS LED will blink again when the 3 settings are successfully reset to the factory default settings. Release the push button. Caution ● Do not turn off the PS-9000 while it is being initialized to the factory default settings. ● When PS-9000 is turned on again after being initialized to the factory default settings, do not press the push button. ● PS-9000 can be initialized to its factory default settings from the Brother PS-9000 Utility. 11
![](/manual_guide/products/brother-international-ps-9000-user-manual-4156177/12.png)