Brother International PT 1950 User Guide - Page 33

EXAMPLE To select the FONT 2 font setting: 1 While holding down c, press 1 once, and keep c held down. FONT 1 2 While still holding down c, continue pressing 1 until FONT 2 is displayed. 3 Release c. FONT 2 A SIZE & WIDE FUNCTIONS The character size can be adjusted using both the Size and Wide functions. Since the character size that can be used depends on the width of the tape, the following table shows the character sizes that can be used with each tape width. Tape widths 6 mm 9 mm 12 mm 18 mm Sizes (in points) 6, 9, 12 6, 9, 12, 18 6, 9, 12, 18, 24 6, 9, 12, 18, 24, 36, 42 The default size setting is AUTO and the default wide setting is OFF. The currently selected size setting is always shown by the indicators above the display. With the AUTO size setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. However, seven other point sizes are also available, and each can be printed with either of the two width settings. 29