Brother International S-7200C Basic Instruction Manual - English - Page 14

3. INSTALLATION 10. Knee lifter plate (1) Knee lifter plate (2) Bolt * Loosen the bolt (3) and the bolt (4), and then adjust the position of the knee lifter plate (1) so that it is easy to use. 4132M 1. Turn the machine pulley so that the feed dog is below the top of the needle plate. 2. Lower the presser foot (6) by using the lifting lever (5). 4133M 4134M 3. Loosen the nut (7). 4. Turn the screw (9) to adjust so that the amount of play in the knee lifter (8) is approximately 2 mm when the knee lifter plate (1) is gently pressed. 5. Securely tighten the nut (7). 6. Loosen the nut (10). 7. Turn the screw (11) until the distance between the end of the screw (11) and the knee lifter (12) is approximately 3 mm. 8. Turn the adjusting screw (11) to adjust so that the presser foot (6) is at the desired position within a distance of 16 mm of the needle plate when the knee liter plate (1) is fully pressed. 9. After adjustment is completed, securely tighten the nut (10). Within 16 mm 4135M 7 S-7200C