Brother International S-7200C Basic Instruction Manual - English - Page 21

Test operation (Operating the treadle), Turning on the power, Test operation

Get Brother International S-7200C PDF manuals and user guides View all Brother International S-7200C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

3. INSTALLATION 3-5. Test operation (Operating the treadle) CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 2114M 1. Turning on the power Press the ON power switch (1). The power indicator (2) will illuminate. 3648M 4307M 2. Test operation 1. Check that the machine sews at low speed when the treadle (1) is gently pressed to position (B). 2. Then check that it sews at high speed when the treadle (1) is gently pressed to position (C). 3. After pressing the treadle (1) forward, check that the needle is lowered to the top of the needle plate when the treadle (1) is returned to the neutral position (A). (when needle down stopping has been set.) 4. If the treadle (1) is pressed to position (D), thread trimming is carried out and the needle then rises above the needle plate and stops. 2117M S-7200C 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
S-7200C
3. INSTALLATION
14
3-5. Test operation (Operating the treadle)
CAUTION
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
1. Turning on the power
Press the ON power switch (1).
The power indicator (2) will illuminate.
2. Test operation
1. Check that the machine sews at low speed when the
treadle (1) is gently pressed to position (B).
2. Then check that it sews at high speed when the treadle
(1) is gently pressed to position (C).
3. After pressing the treadle (1) forward, check that the
needle is lowered to the top of the needle plate when the
treadle (1) is returned to the neutral position (A). (when
needle down stopping has been set.)
4. If the treadle (1) is pressed to position (D), thread
trimming is carried out and the needle then rises above
the needle plate and stops.
3648M
2117M
2114M
4307M