Brother International S-7200C Basic Instruction Manual - English - Page 30

6. SEWING 6. SEWING CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury. y When threading the needle y When replacing the bobbin and needle y When not using the machine and when leaving the machine unattended Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. Secure the table so that it will not move when tilting back the machine head. If the table moves, it may crush your feet or cause other injuries. Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught. 6-1. Sewing 1. Press the power ON switch (1). The power indicator (2) will illuminate. 2. Carry out the programming which is necessary for sewing. (Refer to "Using the operation panel".) 3. Depress the treadle to start sewing. 2114M 6-2. Backtacking 4309M 4224M When the actuator switch (1) or the reverse lever (2) is pressed during sewing, the feed direction will be reversed. When it is released, the feed direction will return to normal. 4225M 23 S-7200C