Brother International SE2000 Operation Manual - Page 115
The SSID and Network Key are incorrect.
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Troubleshooting Error messages Cause/solution The bobbin thread is almost empty. 10 This message is displayed when the bobbin thread is running out. Although a few stitches can be sewn when the "Start/Stop" button is pressed, replace with a wound bobbin immediately. When embroidering, press (Thread cutter button) to cut the threads, raise the presser foot, remove the embroidery frame, and then replace the bobbin with one wound with plenty of embroidery bobbin thread. 11 The bobbin winder safety device has activated. Is the This message is displayed when the bobbin is being wound, and the motor thread tangled? locks because the thread is tangled, etc. This message is displayed when the motor locks due to tangled thread or for 12 The safety device has been activated. Is the other reasons related to thread delivery. thread tangled? Is the needle bent? The "Start/Stop" button does not operate with the This message is displayed when the "Start/Stop" button is pressed to sew 13 foot controller attached. Remove the foot controller. Utility stitches or Character/Decorative stitches while the foot controller is connected. The SSID and Network Key are incorrect. 14 The security information (SSID/network key (password)) is incorrect. Reconfirm the SSID and security information (network key (password)). (page 19) Refer to "How can I find the wireless security information (SSID and network key)" on page 114. The wireless LAN access point/router cannot be detected. 15 The wireless access point/router cannot be detected. 1. Check the following 4 points. - Make sure that the wireless access point/router is powered on. - Move your machine to an area where no items can obstruct the wireless network signal, such as metal doors or walls, or closer to the wireless access point/router. - Temporarily place your machine within about 1 m (3.3 feet) from the wireless access point when you are configuring the wireless settings. - If your wireless access point/router is using MAC address filtering, confirm the MAC address of this machine is allowed in the filter. 2. If you manually entered the SSID and security information (SSID/ authentication method/encryption method/network key (password)), the information may be incorrect. Reconfirm the SSID and security information and re-enter the correct information as necessary. (page 19) Refer to "How can I find the wireless security information (SSID and network key)" on page 114. The wireless security information (Authentication method, Encryption method, Network Key) is incorrect. 16 The wireless security information (authentication method/encryption method/ network key (password)) is incorrect. Refer to the table for the [The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine.] error message, and reconfirm the wireless security information (authentication method/encryption method/network key (password)). (page 19) Refer to "How can I find the wireless security information (SSID and network key)" on page 114. 17 The wireless setting is not activated. The wireless network setting is not activated. Activate the wireless network. (page 19) This pattern cannot be loaded as the pattern extends This message is displayed when the sample stitch pattern that you try to add 18 out of the editable area. with the MY CUSTOM STITCH function extends out of the stitching area. Select a different stitch pattern, or delete the existing stitch pattern (point). This pattern cannot be used. 19 This message appears when you try to retrieve a pattern that cannot be used with this machine, such as when the data is corrupted, or when trying to combine split patterns. This USB media cannot be used. 20 This message is displayed when you try to use incompatible media. Please visit our website (https://s.brother/cphap/) for details on the USB media that can be used. This message is displayed when you try to sew with a stitch other than a 21 Turn off the power and replace the needle straight stitch (middle needle position) while the straight stitch needle plate is plate. installed. APPENDIX 5 113