Brother International SE2000 Operation Manual - Page 21
Enabling a wireless network connection, Using the wizard to set up the wireless, network connection
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Enabling a wireless network connection The machine can be connected to your wireless network. Refer to "Specifications" on page 115 for requirements for a wireless network connection. Touch . a Wireless Network Connection Functions Touch beside [Wireless LAN Setup Wizard]. b 1 A list of available SSIDs appears. Select the SSID that was noted in step a. c GETTING READY Page 9 of the settings screen is displayed. Set [Wireless LAN Enable] to [ON]. b The machine prepares for wireless connection. Using the wizard to set up the wireless network connection There are multiple ways to set up the wireless network connection. We recommend the method that uses the wizard on this machine. In order to connect your machine to a wireless a network, the security information (SSID and network key) for your home network will be required. The network key may also be called a password, security key or encryption key. Check your security information, and write it in the space below. SSID Network key (password) Memo • The wireless network connection cannot be set up if you do not have the security information. • How to find the security information 1 Check the manual provided with your home network. 2 The default SSID may be the manufacturer's name or the model name. 3 If you cannot find the security information, contact the manufacturer of the router, your network administrator or your Internet provider. 4 Some SSIDs and network keys (passwords) may be case sensitive. The screen for entering the network key (password) appears. Memo • When displaying next or previous pages, touch or to search the SSID that was noted. • If the desired SSID is not listed, specify it as described below. 1 Touch in the end of the SSID list. 2 Enter the desired SSID, and then touch . 3 Select the authentication method and encryption mode. • If using a previous connection, touch , and then select the saved SSID. Enter the network key (password) that was noted, and d then touch . 7 1 6 2 3 4 5 1 Text input area 2 Character keys 3 Caps key 4 Space key 5 Letters/numbers/symbols key 6 Cursor keys (Move the cursor to the left or right.) 7 Backspace key (Deletes the character at the cursor's position.) 19