Brother International SL-1110 Instruction Manual - English - Page 14
Cotton stand, Refer to step 6.
View all Brother International SL-1110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5. INSTALLATION 7. Insert the cover (9) of belt cover D (7) in between the belt cover (2) and belt cover D (7), and then place it into the groove of belt cover D (7). 8. Slide the cover (9) down along the groove of belt cover D (7) as far as it will go. 3842M 9. Pull belt cover D (7) toward you until there is no clearance between the belt cover (2) and the cover (9) of belt cover D (7). 10. Fully tighten the two screws (8). (Refer to step 6.) 3843M 9. Cotton stand (1) Cotton stand NOTE: Securely tighten the nut (4) so that the two rubber cushions (2) and the washer (3) are securely clamped and so that the cotton stand (1) does not move. 3844M 7 SL-1110
SL-1110
5. INSTALLATION
7
7. Insert the cover (9) of belt cover D
(7) in between the belt cover (2)
and belt cover D (7), and then place
it into the groove of belt cover D (7).
8. Slide the cover (9) down along the
groove of belt cover D (7) as far as
it will go.
9. Pull belt cover D (7) toward you
until there is no clearance between
the belt cover (2) and the cover (9)
of belt cover D (7).
10. Fully tighten the two screws (8).
(Refer to step 6.)
9. Cotton stand
(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.
3842M
3843M
3844M