Brother International TD-2120N Network Users Guide - Page 21

Troubleshooting I cannot complete the wireless network setup configuration. (TD-2120N/2130N only) (continued) Question I have checked and tried all of the above, but still cannot complete the wireless configuration. Is there anything else I can do? Is your Brother printer correctly connected to the WLAN access point/router? Interface wireless wireless Solution Use [Communication settings] in the Printer Setting Tool. If the STATUS indicator is lit, the network is correctly connected. If the STATUS indicator is blinking, the network is not connected correctly, and the wireless network setup must be reconfigured. The Brother printer is not found on the network during the printer installation. Question Interface Solution Are you using security software? wired/  Confirm your settings in the installer dialog box. 6 wireless  Allow access when the security software alert message appears during the printer installation. Is your Brother printer wireless placed too far from the WLAN access point/router? Place your Brother printer within about 3.3 feet (1 meter) from the WLAN access point/router when you configure the wireless network settings. Are there any obstructions (walls or furniture, for example) between your printer and the WLAN access point/router? wireless Move your Brother printer to an obstruction-free area, or closer to the WLAN access point/router. Is there a wireless computer, Bluetooth supported device, microwave oven or digital cordless phone near the Brother printer or the WLAN access point/router? wireless Move all the devices away from Brother printer or WLAN access point/router. 16