Brother International ULT-2001 Users Manual - English - Page 141
Inserting a Side Zipper, strike the presser foot. If another stitch is selected
View all Brother International ULT-2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
CONTENTS 1 2 6 3 4. Remove presser foot "J". Align the right side of the pin in zipper foot "I" with the presser foot holder, and at- 1 - tach the zipper foot. 1 Right 2 Left 3 Needle drop position 2 - CAUTION When using zipper foot "I", make sure the straight stitch, middle needle position is selected. Turn the balance wheel to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possible leading to injury. 3 - 5. Topstitch 7 to 10 mm (1/4 to 3/8 inch) from the seamed 4 - edge of the fabric, then remove the basting. CAUTION Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. 5 - s Inserting a Side Zipper Use for side zippers in skirts or dresses. 1. Select . 6 - 7 - CAUTION Make sure you sew using the middle needle position. 8 - 9 - ?! 3-68 Sewing Utility Stitches Index