Brother International ULT-2001 Users Manual - English - Page 63
Getting Ready to Sew, Hold the thread from the spool with both hands,
View all Brother International ULT-2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CONTENTS 4. Pull up the supplemental spool pin and set it in the up position. 1 - 2 - 5. Place additional spool of thread on the supplemental 3 1 spool pin, so that the thread unrolls from the back. 3 - Then insert a spool cap onto the spool pin all the way in, to secure the thread spool. 1 Spool pin 2 Spool cap 3 Additional spool of thread 4 - 2 6. Hold the thread from the spool with both hands, and set the thread in the thread guide. * Do not set the thread in the bobbin winding thread guide. 5 - 6 - 7. Set the thread around the thread guide plate, then pass the thread through the groove according to threading sequence (numbers) indicated on the machine. 7 - 8 - 9 - w ?! 2-6 Getting Ready to Sew Index
2-6
Getting Ready to Sew
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
1
2
3
▼
4.
Pull up the supplemental spool pin and set it in the up
position.
5.
Place additional spool of thread on the supplemental
spool pin, so that the thread unrolls from the back.
Then insert a spool cap onto the spool pin all the way
in, to secure the thread spool.
1
Spool pin
2
Spool cap
3
Additional spool of thread
6.
Hold the thread from the spool with both hands, and
set the thread in the thread guide.
*
Do not set the thread in the bobbin winding thread
guide.
7.
Set the thread around the thread guide plate, then pass
the thread through the groove according to threading
sequence (numbers) indicated on the machine.