Brother International ULT-2001 Users Manual - English - Page 44

1 3 2 1 1 w 3. Pivot the spool pin so that it angles toward the front of the machine. Set the thread spool on the spool pin so that the thread unrolls from the front of the spool. 4. Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position. 1 Spool cap CONTENTS 1 - 2 - CAUTION • If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break. • Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break. 3 - 4 - Note When sewing with fine, cross-wound thread (see the illustration), use the small spool cap, and leave a small space between the cap and the thread spool (see the illustration at left). 1 Spool cap (small) 2 Thread spool (cross-wound thread) 3 Space 5. Hold the thread from the spool in both hands, and pass the thread around the plate in the thread guides. Use both hands to set the thread around the thread guide plate. 1 Thread guide plate 5 - 6 - 7 - 8 - 9 - ?! Setting Up 1-33 Index