Brother International VX-807 Users Manual - English - Page 7
Operating, Sewing Machine
View all Brother International VX-807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Operating Your Sewing Machine "nl»",4' It CONNECTING PLUGS 1. First connect the three-prong plug into the machine. 2. Then connect the electric supply plug into a wall outlet. Caution When changing needle, bobbin or light bulb, or when sewing machine is not in use, it is recommended that electrical supply plug is disconnected to avoid electrical hazards. Remark: The illustration on this page depicting the use of two pin plug is not applicable to use in U.K. CONTROLLING SEWING SPEED Place foot on foot control as shown in illustration. When foot control is pushed down lightly, machine will run at a low speed. When pressure on foot control is increased, machine will pick up speed. fit When foot control is released, machine will stop. NOTE: 1. Care should be taken that nothing is placed on foot controller when machine is not in use. 2. A new sewing machine or one that has not been in use for a long period of time should be oiled as per instruction on page 30 Si 31. After oiling, be sure to wipe up any excess oil. -5-