Brother International XL-2121 Users Manual - English - Page 19

KNOWING YOUR SEWING MACHINE THREADING THE MACHINE Winding the Bobbin CAUTION ● Only use the bobbin (part code: SA156, SFB (XA5539-151)) that has been designed for this sewing machine. Using of any other bobbin may cause damage to the machine. ● We designed the bobbin that comes with this machine. If you use bobbins from older models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB (XA5539-151)). Actual size 11.5 mm (7/16 inch) This model Older model 1 2 1Bobbin-winding tension disc 2Bobbin-winder shaft Put the spool of thread on the spool pin and 1 pass the thread around the bobbin-winding tension disc. CAUTION Put the bobbin onto the bobbin-winder shaft 3 and slide the bobbin-winder shaft to the right. Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the groove of the bobbin. ● If the spool of thread is not in the right place, the thread may tangle on the spool pin. Pass the end of the thread through the hole on 2 the bobbin from the inside of the bobbin. 2 1 1 Spring on the shaft 2 Groove of the bobbin 18