Brother International XL-2121 Users Manual - English - Page 57
otherwise the upper thread may become
View all Brother International XL-2121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
APPENDIX Check that the edge of the race shelf is 8 positioned as in step 5, and then put the shuttle in so that the projection on the shuttle lines up with the spring. 1 2 2 1 1 Projection 2 Spring Put the tabs on the needle plate cover into the 9 needle plate, and then slide the cover back on. CAUTION ● Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3152-021), contact your nearest authorized service center. ● Make sure that you fit the shuttle properly, otherwise the needle may break. 56
APPENDIX
—————————————————————————————————————————————————————
56
8
Check that the edge of the race shelf is
positioned as in step
5
, and then put the
shuttle in so that the projection on the shuttle
lines up with the spring.
1
Projection
2
Spring
9
Put the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
●
Never use a shuttle that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
shuttle (part code: XC3152-021), contact
your nearest authorized service center.
●
Make sure that you fit the shuttle
properly, otherwise the needle may
break.
2
1
1
2
CAUTION