Brother International XL-2121 Users Manual - English - Page 23

clicks into place.

Get Brother International XL-2121 PDF manuals and user guides View all Brother International XL-2121 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

KNOWING YOUR SEWING MACHINE Slide the button and open the cover. 2 1 2 Replace the bobbin cover. Put the left tab in 4 place (see arrow 1), and then press lightly on the right side (see arrow 2) until the cover clicks into place. 2 1 Cover 2 Slide button Put the bobbin in, feed the end of the thread 3 through the slit, and then pull the thread to cut it. 1 • You can begin sewing immediately without drawing up the bobbin thread. If you want to draw up the bobbin thread before you start to sew, follow to the procedure in "Drawing up the lower thread" (page 26). • Only use bobbins that were designed to be used with this machine. CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. 1 1 Cutter 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
KNOWING YOUR SEWING MACHINE
—————————————————————————————————————————
22
2
Slide the button and open the cover.
1
Cover
2
Slide button
3
Put the bobbin in, feed the end of the thread
through the slit, and then pull the thread to
cut it.
• Only use bobbins that were designed to be
used with this machine.
1
Cutter
4
Replace the bobbin cover. Put the left tab in
place (see arrow
1
), and then press lightly on
the right side (see arrow
2
) until the cover
clicks into place.
• You can begin sewing immediately without
drawing up the bobbin thread. If you want to
draw up the bobbin thread before you start
to sew, follow to the procedure in “Drawing
up the lower thread” (page 26).
●
Make sure you set the bobbin so the thread
unrolls in the right direction. If the thread
unrolls in the wrong direction, it may cause
the thread tension to be incorrect or break
the needle.
1
2
CAUTION
1
2
1