Campbell Scientific NL201 NL200/NL201 Network Link Interface - Page 13

Connect, 4. Overview, Connect

Get Campbell Scientific NL201 PDF manuals and user guides View all Campbell Scientific NL201 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

NL200/201 Network Link Interface 3.4 Connect You are now ready to connect to your datalogger using the LoggerNet Connect Screen. 4. Overview The NL200/201 Network Link Interface is a device used to communicate with Campbell Scientific dataloggers and peripherals using an Ethernet 10/100 Mbps communications link. The NL200/201 includes a CS I/O port and an RS-232 port for communication. A USB device port is used for configuring the NL200/201 device. FIGURE 4-1. NL201 Bridge Mode Enabled The NL200/201 can be configured to bridge Ethernet and CS I/O communications (Bridge Mode enabled). This mode is used for providing access to the internal IP functionality of the CR800/850, CR1000, and CR3000 (e.g., web page access, email, FTP, etc.). Bridge mode does not utilize PPP. Instead, raw IP packets are transferred between the Ethernet and CS I/O connections. Ethernet I/O Ethernet Interface Internal Ethernet / CS I/O Bridge FIGURE 4-2. Bridge Mode enabled CS I/O IP over CS I/O (SDC Channel 1 or 3) NOTE: Devices connected to CS I/O port must support IP over CS I/O (ex. CR800, CR1000, CR3000). 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
NL200/201 Network Link Interface
3.4
Connect
You are now ready to connect to your datalogger using the LoggerNet Connect
Screen.
4.
Overview
The NL200/201 Network Link Interface is a device used to communicate with
Campbell Scientific dataloggers and peripherals using an Ethernet 10/100
Mbps communications link.
The NL200/201 includes a CS I/O port and an
RS-232 port for communication.
A USB device port is used for configuring
the NL200/201 device.
FIGURE 4-1.
NL201
Bridge Mode Enabled
The NL200/201 can be configured to bridge Ethernet and CS I/O
communications (Bridge Mode enabled).
This mode is used for providing
access to the internal IP functionality of the CR800/850, CR1000, and CR3000
(e.g., web page access, email, FTP, etc.).
Bridge mode does not utilize PPP.
Instead, raw IP packets are transferred between the Ethernet and CS I/O
connections.
Ethernet Interface
Ethernet / CS I/O
Bridge
IP over CS I/O
(SDC Channel 1 or 3)
Ethernet I/O
Internal
CS I/O
NOTE: Devices connected
to CS I/O port must support
IP over CS I/O (ex. CR800,
CR1000, CR3000).
FIGURE 4-2.
Bridge Mode enabled
5