Canon 1191B001 XH G1 XH A1 Instruction Manual - Page 20
Changing the Viewfinder and the LCD Panel to Black & White Display
![]() |
View all Canon 1191B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using the Viewfinder and the LCD Panel Simultaneously By default, the viewfinder display is turned off while you use the LCD panel. Follow the procedure below to use both of them simultaneously. MENU ( 25) DISPLAY SETUP/ CVF+LCD ON•••OFF 1. Press the MENU button. 2. Turn the SELECT/SET dial to select [DISPLAY SETUP/ ] and press the dial. 3. Select [CVF+LCD ON], set it to [ON] and press the dial. 4. Press the MENU button to close the menu. Changing the Viewfinder and the LCD Panel to Black & White Display The LCD display and the viewfinder are both color displays. Follow the procedure below to turn both of them to black & white display mode. MENU ( 25) DISPLAY SETUP/ CVF+LCD BW•••OFF 1. Press the MENU button. 2. Turn the SELECT/SET dial to select [DISPLAY SETUP/ ] and press the dial. 3. Select [CVF+LCD BW], set it to [ON] and press the dial. 4. Press the MENU button to close the menu. Fastening the Grip Belt Adjust the grip belt so that you can reach the zoom lever with your index and middle finger, and the start/stop button with your thumb. Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. Be careful not to drop the camcorder when adjusting the strap or the grip belt. 20
![](/manual_guide/products/canon-xh-a1-xh-g1-xh-a1-instruction-manual-5ff55bc/20.png)