Canon 2083B001 PowerShot SD950 IS DIGITAL ELPH / DIGITAL IXUS 960 IS Camera Us - Page 194
Subject in recorded image is too bright, or image, flashes white., Image contains noise., White dots
View all Canon 2083B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
192 Troubleshooting Subject in recorded image is too bright, or image flashes white. Subject is too close, making z Shoot with the subject within the the flash too strong. correct flash range when using the built-in flash (p. 215). The subject is overexposed z Set the exposure compensation to a because the surroundings negative (-) setting (p. 107). are too dark. z Use the AE Lock or spot metering functions (pp. 102, 108). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. z Set the flash to (Flash off) (p. 71). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 104). z In and modes, as well as when using the Auto ISO Shift, the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles or with digital cameras and does not insects in the air. This is constitute a malfunction. particularly noticeable when shooting using the wide angle.