Canon 2083B001 PowerShot SD950 IS DIGITAL ELPH / DIGITAL IXUS 960 IS Camera Us - Page 47
Indicators, Power Saving Function
![]() |
View all Canon 2083B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Components Guide 45 Indicators The indicators on the back of the camera light or blink under the following conditions. Right Indicator Green: Ready to shoot (camera beeps twice) Blinking Green: Time Lapse (movie) recording/Image recording/ reading/erasing/transferring (when connected to a computer/printer) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning) Left Indicator Yellow: Macro mode/infinity mode/AF lock mode Blinking Yellow: Focusing difficulty (camera beeps once) Never do the following while the indicator blinks green. These actions may corrupt image data. - Shake or jolt the camera - Turn off the camera, or open the memory card slot/battery cover Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on. Playback Mode Powers down approximately 5 minutes after the Connected to a Printer last control is accessed on the camera. * This time can be changed. z The power saving function will not activate during a slide show or while the camera is connected to a computer. z The power saving function settings can be changed (p. 51).
![](/manual_guide/products/canon-sd950-powershot-sd950-digital-elph-digital-ixus-960-camera-user-guide-cb1a6b9/47.png)