Canon 2224B002 REALiS Manual - Page 111

Setting Various Function Turning On/Off the LED Illumination [LED illumination] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can turn on/off the LED illumination lamp and the LEDs on the terminals (P24, 25, 26). Setting up the Remote Control [Remote control] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can change the channel settings to prevent the two remote controls from interfering with each other when you use two projectors at the same time. T System settings T LED illumination T System settings T Other settings T Remote control SETTING UP FUNCTIONS FROM MENUS Off Turns off all LEDs. On Turns on LEDs as necessary. Press the [OK] button to confirm, and then press the [MENU] button. z This setting does not effect the POWER indicator or WARNING lamp. Ch1 Selects the channel on the projector you use. Ch2 Press the [OK] button to confirm, and then press the [MENU] button. Selecting a Channel on the Remote Control Press the [LIGHT] button for 3 seconds while holding down the [OK] button on the remote control. The above operation toggles the channel between Ch1 (the button flashes once) and Ch2 (the button flashes twice). z Make sure to set the same channel for both remote control and projector. z Performing this operation with the remote control, you cannot control the projector after pressing the [OK] button. Make sure to change the channel for the remote control at the same time. 111