Canon 2224B002 REALiS Manual - Page 46
Selecting an Input Signal
![]() |
UPC - 013803087260
View all Canon 2224B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
< PROJECTING AN IMAGE FROM THE COMPUTER Selecting an Input Signal You can select an input signal type. Select an input signal from the followings: ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable (supplied cable) DIGITAL PC : Digital signal Connecting with a DVI digital cable ANALOG PC-2 : Analog signal Connecting with a VGA cable or 5-BNC cable Select an appropriate input signal before starting the auto setup function by following the steps below if you change the input signal due to changing the connection to the computer or so. z An LED for a terminal flushes in green if a cable is connected and an input signal is confirmed. An LED for a terminal turns on if the projected image is obtained through the terminal (P24, 25). z Connecting a DVI cable to Input Terminal-1, select the appropriate input signal with the [INPUT] button in accordance with the setting on the computer (digital signal/analog signal). Selecting [ANALOG PC-1] or [DIGITAL PC] 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select [ANALOG PC-1] or [DIGITAL PC] in the menu with the [INPUT] button. The selection is toggled through available input signal types from above. z You can select any input signal type from all options through the [ ] / [ ] button. 46
![](/manual_guide/products/canon-2224b002-realis-manual-5dd60c9/46.png)