Canon 2224B002 REALiS Manual - Page 91
Adjusting the Total Number of Dots, Adjusting the Tracking
![]() |
UPC - 013803087260
View all Canon 2224B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Setting Display Status Adjusting the Total Number of Dots [Total dots] ANALOG PC You can select the total number of dots in the horizontal direction. Adjust the number of dots when the image distorts or noise is displayed on the screen at both sides. Adjusting the Tracking [Tracking] ANALOG PC You can fine-tune the timing for generating an image from the image signal. Adjust the tracking when the image flickers or distorts. T Display settings T Input signal select T Total dots T Display settings T Input signal select T Tracking > Increases the total number of dots. < Decreases the total number of dots. Press the [MENU] button when you finish. z Perform this adjustment if the auto PC adjustment function cannot adjust the project image correctly. z The setting is recorded for [ANALOG PC-1] and [ANALOG PC-2] separately. > Increases the set value. < Decreases the set value. Press the [MENU] button when you finish. z Perform this adjustment if the auto PC adjustment function cannot adjust the project image correctly. z The setting is recorded for [ANALOG PC-1] and [ANALOG PC-2] separately. SETTING UP FUNCTIONS FROM MENUS 91
![](/manual_guide/products/canon-2224b002-realis-manual-5dd60c9/91.png)